View MTGEZW-00-0000-0B00F040F_8675489.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds36 rev 9d cree ? xlamp ? mt-g easywhite ? leds pro du ct descript ion the xlamp ? mt-g e asywhite ? led maximizes lumen density, eliminates chromaticity binning and enables luminaire and bulb manufacturers to deliver consistent color and high?effcacy light output in a new, compact, multi -die package. xlamp mt-g e asywhite leds can reduce l e d-to-le d color variation to within a 2 - step macadam ellipse, 94% smaller than the total area of the corresponding ansi c78.377 color region. the xlamp mt-g e asywhite le d is the perfect choice for lighting applications where high luminous fux output is required from a single, small point source. e xample applications include: led retroft bulbs, commercial/retail display spotlights, and other indoor general illumination applications. feat ures ? cree e asywhite color temperatures from 2700?k to 5000?k cct ? wide range of operating power - up to 25?w ? 85?c binning and characterization ? two voltage options: 6?v, 36?v ? low effective thermal resistance: 1.5?c/w ? high lumen density ? wide viewing angle: 120 ? 80?minimum cri at 2700?k and 3000?k cct ? 85? and 90? minimum cri available in 2700?k and 3000?k cct ? e lectrically neutral thermal path ? rohs and re ach compliant ? ul ? recognized component (e349212) appli cat ions ? mr, par and other directional retroft bulbs ? commercial/residential directional lighting ? general illumination t able o f c on ten t s characteristics ....................................... 2 flux characteristics, easywhite ? order codes and bins ? 6?v .............................. 3 flux characteristics, easywhite ? order codes and bins ? 36?v ............................ 5 relative spectral power distribution .... 7 relative luminous flux vs. junction temperature ........................................... 7 e lectrical characteristics ....................... 8 relative luminous flux vs. current ....... 9 typical spatial distribution .................. 10 performance groups C brightness ..... 10 performance groups C chromaticity .. 11 cree easywhite ? color temperatures plotted on the 1931 cie curve ............ 12 bin and order code formats ............... 12 refow soldering characteristics ........ 13 notes .................................................... 14 mechanical dimensions ...................... 16 tape and reel ....................................... 17 packaging ............................................. 18 product family data sheet copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www . cree . c om/x lamp
2 ch ar acteristics characteristics unit minimum typical maximum viewing angle (fwhm) degrees 120 e sd withstand voltage (hbm per mil-std-883d) v 8000 e ffective thermal resistance, junction to solder point c/w 1.5 le d junction temperature c 150 dc forward current (6?v) ma 1100 4000 dc forward current (36?v) ma 185 700 forward voltage (6?v, 1100?ma, 85?c) v 5.6 6.7 forward voltage (36?v, 185?ma, 85?c) v 33.5 40.2 temperature coeffcient of voltage (6?v) mv/c ?4.5 temperature coeffcient of voltage (36?v) mv/c -27 reverse voltage (6?v) v ?5 reverse current (6v, 36?v) ma 0.1 copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
3 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 14). ? minimum cri for standard color temperatures 27f, 27h, 30f, 30h is 80. ? minimum cri for standard color temperatures 35f, 35h, 40f, 40h is 77. ? minimum cri for standard color temperature 50f, 50h is 75. ? typical cri for standard color temperatures 35f, 35h, 40f, 40h is 80. ? minimum cri for 85 cri minimum is 85. ? minimum cri for 90 cri minimum is 90. * flux values @ 25?c are calculated and for reference only. fl ux ch ar acteristic s, ea sywhi te ? order c o des and bins - 6?v ( i f ?=?1100? m a, t j ?=?85?c) the following tables provide order codes for 6-volt xlamp mt-g e asywhite le ds. for a complete description of the order code nomenclature, please reference page 12 of this document. color cct range minimum luminous flux @ 1100?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code standard cri 5000 k h0 560 642 50h mtgezw ?00?0000?0b00h050h 50f mtgezw ?00?0000?0b00h050f j0 600 688 mtgezw ?00?0000?0b00j050h mtgezw ?00?0000?0b00j050f k0 650 745 mtgezw ?00?0000?0b00k050h mtgezw ?00?0000?0b00k050f 4000 k f0 480 550 40h mtg e zw-00-0000-0b00f040h 40f mtg e zw-00-0000-0b00f040f g0 520 596 mtg e zw-00-0000-0b00g040h mtg e zw-00-0000-0b00g040f h0 560 642 mtg e zw-00-0000-0b00h040h mtg e zw-00-0000-0b00h040f j0 600 688 mtg e zw-00-0000-0b00j040h mtg e zw-00-0000-0b00j040f 3500 k e0 440 504 35h mtgezw ?00?0000?0b00e035h 35f mtgezw ?00?0000?0b00e035f f0 480 550 mtgezw ?00?0000?0b00f035h mtgezw ?00?0000?0b00f035f g0 520 596 mtgezw ?00?0000?0b00g035h mtgezw ?00?0000?0b00g035f h0 560 642 mtgezw ?00?0000?0b00h035h mtgezw ?00?0000?0b00h035f 3000 k e0 440 504 30h mtg e zw-00-0000-0b00e030h 30f mtg e zw-00-0000-0b00e030f f0 480 550 mtg e zw-00-0000-0b00f030h mtg e zw-00-0000-0b00f030f g0 520 596 mtg e zw-00-0000-0b00g030h mtg e zw-00-0000-0b00g030f h0 560 642 mtg e zw-00-0000-0b00h030h mtg e zw-00-0000-0b00h030f 2700 k d0 400 458 27h mtg e zw-00-0000-0b00d027h 27f mtg e zw-00-0000-0b00d027f e0 440 504 mtg e zw-00-0000-0b00e027h mtg e zw-00-0000-0b00e027f f0 480 550 mtg e zw-00-0000-0b00f027h mtg e zw-00-0000-0b00f027f g0 520 596 mtg e zw-00-0000-0b00g027h mtg e zw-00-0000-0b00g027f 85 cri minimum 3000 k d0 400 458 30h mtg e zw-00-0000-0b0pd030h 30f mtg e zw-00-0000-0b0pd030f e0 440 504 mtg e zw-00-0000-0b0pe030h mtg e zw-00-0000-0b0pe030f f0 480 550 mtg e zw-00-0000-0b0pf030h mtg e zw-00-0000-0b0pf030f 2700 k d0 400 458 27h mtg e zw-00-0000-0b0pd027h 27f mtg e zw-00-0000-0b0pd027f e0 440 504 mtg e zw-00-0000-0b0pe027h mtg e zw-00-0000-0b0pe027f copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
4 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 14). ? minimum cri for standard color temperatures 27f, 27h, 30f, 30h is 80. ? minimum cri for standard color temperatures 35f, 35h, 40f, 40h is 77. ? minimum cri for standard color temperature 50f, 50h is 75. ? typical cri for standard color temperatures 35f, 35h, 40f, 40h is 80. ? minimum cri for 85 cri minimum is 85. ? minimum cri for 90 cri minimum is 90. * flux values @ 25?c are calculated and for reference only. color cct range minimum luminous flux @ 1100?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code 90 cri minimum 3000 k c0 370 424 30h mtg e zw-00-0000-0b0uc030h 30f mtg e zw-00-0000-0b0uc030f d0 400 458 mtg e zw-00-0000-0b0ud030h mtg e zw-00-0000-0b0ud030f e0 440 504 mtg e zw-00-0000-0b0ue030h mtg e zw-00-0000-0b0ue030f 2700 k b0 340 390 27h mtg e zw-00-0000-0b0ub027h 27f mtg e zw-00-0000-0b0ub027f c0 370 424 mtg e zw-00-0000-0b0uc027h mtg e zw-00-0000-0b0uc027f d0 400 458 mtg e zw-00-0000-0b0ud027h mtg e zw-00-0000-0b0ud027f fl ux ch ar acteristic s, ea sywhi te ? order c o des and bins - 6?v ( i f ?=?1100? m a, t j ?=?85?c) - c o ntinued copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
5 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 14). ? minimum cri for standard color temperatures 27f, 27h, 30f, 30h is 80. ? minimum cri for standard color temperatures 35f, 35h, 40f, 40h is 77. ? minimum cri for standard color temperature 50f, 50h is 75. ? typical cri for standard color temperatures 35f, 35h, 40f, 40h is 80. ? minimum cri for 85 cri minimum is 85. ? minimum cri for 90 cri minimum is 90. * flux values @ 25?c are calculated and for reference only. fl ux ch ar acteristic s, ea sywhi te ? order c o des and bins - 36?v ( i f ?=?185? m a, t j ?=?85?c) the following table provide order codes for 36-volt xlamp mt-g e asywhite le ds. for a complete description of the order code nomenclature, please reference page 12 of this document. color cct range minimum luminous flux @ 185?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code standard cri 5000 k h0 560 642 50h mtgezw ?00?0000?0n00h050h 50f mtgezw ?00?0000?0n00h050f j0 600 688 mtgezw ?00?0000?0n00j050h mtgezw ?00?0000?0n00j050f k0 650 745 mtgezw ?00?0000?0n00k050h mtgezw ?00?0000?0n00k050f 4000 k f0 480 550 40h mtg e zw-00-0000-0n00f040h 40f mtg e zw-00-0000-0n00f040f g0 520 596 mtg e zw-00-0000-0n00g040h mtg e zw-00-0000-0n00g040f h0 560 642 mtg e zw-00-0000-0n00h040h mtg e zw-00-0000-0n00h040f j0 600 688 mtg e zw-00-0000-0n00j040h mtg e zw-00-0000-0n00j040f 3500 k e0 440 504 35h mtgezw ?00?0000?0n00e035h 35f mtgezw ?00?0000?0n00e035f f0 480 550 mtgezw ?00?0000?0n00f035h mtgezw ?00?0000?0n00f035f g0 520 596 mtgezw ?00?0000?0n00g035h mtgezw ?00?0000?0n00g035f h0 560 642 mtgezw ?00?0000?0n00h035h mtgezw ?00?0000?0n00h035f 3000 k e0 440 504 30h mtg e zw-00-0000-0n00e030h 30f mtg e zw-00-0000-0n00e030f f0 480 550 mtg e zw-00-0000-0n00f030h mtg e zw-00-0000-0n00f030f g0 520 596 mtg e zw-00-0000-0n00g030h mtg e zw-00-0000-0n00g030f h0 560 642 mtg e zw-00-0000-0n00h030h mtg e zw-00-0000-0n00h030f 2700 k d0 400 458 27h mtg e zw-00-0000-0n00d027h 27f mtg e zw-00-0000-0n00d027f e0 440 504 mtg e zw-00-0000-0n00e027h mtg e zw-00-0000-0n00e027f f0 480 550 mtg e zw-00-0000-0n00f027h mtg e zw-00-0000-0n00f027f g0 520 596 mtg e zw-00-0000-0n00g027h mtg e zw-00-0000-0n00g027f 85 cri minimum 3000 k d0 400 458 30h mtg e zw-00-0000-0b0pd030h 30f mtg e zw-00-0000-0b0pd030f e0 440 504 mtg e zw-00-0000-0b0pe030h mtg e zw-00-0000-0b0pe030f f0 480 550 mtg e zw-00-0000-0b0pf030h mtg e zw-00-0000-0b0pf030f 2700 k d0 400 458 27h mtg e zw-00-0000-0b0pd027h 27f mtg e zw-00-0000-0b0pd027f e0 440 504 mtg e zw-00-0000-0b0pe027h mtg e zw-00-0000-0b0pe027f copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
6 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 14). ? minimum cri for standard color temperatures 27f, 27h, 30f, 30h is 80. ? minimum cri for standard color temperatures 35f, 35h, 40f, 40h is 77. ? minimum cri for standard color temperature 50f, 50h is 75. ? typical cri for standard color temperatures 35f, 35h, 40f, 40h is 80. ? minimum cri for 85 cri minimum is 85. ? minimum cri for 90 cri minimum is 90. * flux values @ 25?c are calculated and for reference only. fl ux ch ar acteristic s, ea sywhi te ? order c o des and bins - 36?v ( i f ?=?185? m a, t j ?=?85?c) - c o ntinued color cct range minimum luminous flux @ 185?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code 90 cri minimum 3000 k c0 370 424 30h mtg e zw-00-0000-0b0uc030h 30f mtg e zw-00-0000-0b0uc030f d0 400 458 mtg e zw-00-0000-0b0ud030h mtg e zw-00-0000-0b0ud030f e0 440 504 mtg e zw-00-0000-0b0ue030h mtg e zw-00-0000-0b0ue030f 2700 k b0 340 390 27h mtg e zw-00-0000-0b0ub027h 27f mtg e zw-00-0000-0b0ub027f c0 370 424 mtg e zw-00-0000-0b0uc027h mtg e zw-00-0000-0b0uc027f d0 400 458 mtg e zw-00-0000-0b0ud027h mtg e zw-00-0000-0b0ud027f copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
7 r elativ e spec tral po wer distributio n (6?v, 1100? m a ; 36?v, 185? m a; t j = 85?c) the following graph represents typical spectral output of the xlamp mt-g easywhite le d. r elativ e l umino us flux v s. junc tio n t emperature (6?v, 1100? m a; 36?v, 185? m a ) the following graph represents typical performance of the xlamp mt-g easywhite le d. relative spectral power distribution white - the only roboto graph the following graph represents typical spectral output of each die of the mt-g 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative spectral power wavelength (nm) cool white warm white relative flux output vs. junction temperature (if = 1100 ma, or 183.33 if @ 36v) the following graph represents typical performance of each led die in the xlamp mt-g 0% 20% 40% 60% 80% 100% 120% 20 40 60 80 100 120 140 relative luminous flux junction temperature (oc) copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
8 elec tric al chara c teristic s ( t j = 85?c) electrical characteristics (tsp = 85oc) 6v 0 500 1000 1500 2000 2500 3000 3500 4000 5 5.25 5.5 5.75 6 6.25 current (ma) forward voltage( v) 6 v 36v 0 100 200 300 400 500 600 700 31 32 33 34 35 36 37 38 current (ma) forward voltage( v) 36 v copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
9 r elativ e l umino us flux v s. current ( t j = 85?c) relative intensity vs. current (tsp = 85oc) 0% 50% 100% 150% 200% 250% 300% 0 500 1000 1500 2000 2500 3000 3500 4000 relative luminous flux forward current, pulsed (ma) 6 v 0% 50% 100% 150% 200% 250% 300% 0 100 200 300 400 500 600 700 relative luminous flux forward current, pulsed (ma) 36 v copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
10 ty pical spati al distribution the following graph represents typical performance of the xlamp mt-g easywhite le d. perfo rman c e gro ups C bri g htness ( t j = 85?c) xlamp mt-g easywhite le ds are tested for luminosity and placed into one of the following bins. group code min. l uminous flux @ 1100?ma, 6?v; @185?ma, 36?v max. l uminous flux @ 1100?ma, 6?v; @185?ma, 36?v a0 310 340 b0 340 370 c0 370 400 d0 400 440 e0 440 480 f0 480 520 g0 520 560 h0 560 600 j0 600 650 k0 650 700 spatial distribution 0% 20% 40% 60% 80% 100% - 90 - 60 - 30 0 30 60 90 relative luminous intensity angle (o) copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
11 perfo rman c e gro ups C chr o mati c ity ( t j = 85?c) xlamp mt ? g easywhite leds are tested for chromaticity and placed into one of the regions defned by the following bounding coordinates. easywhite ? color temperatures C 4- step code cct x y 50f 5000 k 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 40f 4000 k 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 35f 3500 k 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 30f 3000 k 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 27f 2700 k 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4589 0.4021 easywhite ? color temperatures C 4- step code cct x y 50h 5000 k 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 40h 4000 k 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3844 0.3778 35h 3500 k 0.4030 0.3857 0.4061 0.3941 0.4132 0.3976 0.4099 0.3890 30h 3000 k 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 27h 2700 k 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060 copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
12 cree ea sywhi te ? c o l o r t emperatures pl o tted o n the 1931 c ie cur v e ( t j = 85?c) b in and o rde r code for mat s bin codes and order codes are confgured as follows: o rder code bin code 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 5700 k 0 . 3 2 0.33 0.34 0 . 3 5 0 . 3 6 0.37 0.38 0 . 3 9 0 . 4 0 0.41 0 . 4 2 0 . 4 3 0 . 4 4 0.45 0. 32 0.33 0.34 0.35 0.36 0. 37 0.38 0. 39 0.40 0. 41 0.42 0.43 0. 44 0.45 0. 46 0.47 0. 48 0.49 ccy ccx ansi c78 . 37 7 q u a dr a ng le e a s y wh ite 4-step e a s y wh ite 2-step sssccc-bb-hhhh-nnnrnnnnn series mtg = mt -g internal code cri specificatio n u = 90 cri minimum p = 85 cri minimum 0 = standar d cri kit code vf class b0 = 6-v class n0 = 36-v class reel size 0 = 500 (standar d) 1 = 100 (nonstandar d) color ezw = easywhite sssccc-bb-www -ff-nnraaaa series mtg = mt -g internal code flux bi n cri specificatio n u = 90 cri minimum p = 85 cri minimum h = standar d minimum internal code vf class b0 = 6-v class n0 = 36-v class chromaticity bi n color ezw = easywhite copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
13 refl o w so ldering ch ar acteristics in testing, cree has found xlamp mt-g e asywhite le ds to be compatible with jede c j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of the solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profile feature lead-free solder average ramp-up rate (ts max to tp) 1.2?c/second preheat: temperature min (ts min ) 120 c preheat: temperature max (ts max ) 170 c preheat: time (ts min to ts max ) 65?150 seconds time maintained above: temperature (t l ) 217 c time maintained above: time (t l ) 45?90 seconds peak/classifcation temperature (tp) 235 ? 245 c time within 5?c of actual peak temperature (tp) 20-40 seconds ramp-down rate 1 ? 6 c/second time 25?c to peak temperature 4 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. ipc/jedec j?std?020c t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
14 no tes measurements the luminous fux, radiant power, chromaticity and cri measurements in this document are binning specifcations only and solely represent product measurements as of the date of shipment. these measurements will change over time based on a number of factors that are not within crees control and are not intended or provided as operational specifcations for the products. calculated values are provided for informational purposes only and are not intended as specifcations. p re-release qualifcation t esting please read the le d reliability overview for details of the qualifcation process cree applies to ensure long? term reliability for xlamp leds and details of crees pre ? release qualifcation testing for xlamp leds. lumen maintenance cree now uses standardized i e s lm-80-08 and tm-21-11 methods for collecting long-term data and extrapolating le d lumen maintenance. for information on the specifc lm ? 80 data sets available for this led, refer to the public lm-80 results document . moisture sensitivity cree recommends keeping xlamp l e ds in the provided, resealable moisture-barrier packaging (mbp) until immediately prior to soldering. unopened mbps that contain xlamp le ds do not need special storage for moisture sensitivity. once the mbp is opened, xlamp mt ? g easywhite leds may be stored as msl 1 per jedec j?std? 033, meaning they have unlimited foor life in conditions of 30 oc/85% relative humidity (rh). regardless of storage condition, cree recommends sealing any unsoldered leds in the original mbp. rohs compliance the levels of rohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product documentation sections of www.cree.com . r each compliance re ach substances of very high concern (sv hcs) information is available for this product. since the e uropean chemical agency ( e cha) has published notice of their intent to frequently revise the s v hc listing for the foreseeable future, please contact a cree representative to insure you get the most up-to-date r e ach sv hc declaration. re ach banned substance information (re ach article 67) is also available upon request. ul ? r ecognized component level 4 enclosure consideration. the led package or a portion thereof has been investigated as a fre and electrical enclosure per ansi/ ul 8750. copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
no te s - con tinued 15 vision a dvisory warning. do not look at exposed l e d lamps in operation. e ye injury can result. for more information about l e ds and eye safety, please refer to the led e ye safety application note . copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
16 mech anical dimensions all measurements are .25 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 9.113 9.113 .650 4.85 .25 r 4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1 / 1 9.000 c 2610-00011 tiger 9191 outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 10/8/10 b changed solder pad view dc 1/11/11 c added stencil view dc 2/18/11 recommended pc board solder pad recommended stencil pattern size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 9.113 9.113 .650 4.85 .25 r 4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1 / 1 9.000 c 2610-00011 tiger 9191 outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 10/8/10 b changed solder pad view dc 1/11/11 c added stencil view dc 2/18/11 recommended pc board solder pad recommended stencil pattern size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 8.90 8.90 4.85 .25 r 4.100 .650 8.90 8.90 .950 .500 6.000 1 / 1 9.000 a 2610-00016 36v mt-g outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 6/16/11 recommended pc board solder pad recommended stencil pattern mt -g 6 v mt -g 36 v size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 8.90 8.90 .650 4.85 .25 r 4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1 / 1 9.000 d 2610-00011 tiger 9191 outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 10/8/10 b changed solder pad view dc 1/11/11 c added stencil view dc 2/18/11 d changed overall dim to match cut length and width dc 3/25/11 recommended pc board solder pad recommended stencil pattern anode anode size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 8.90 8.90 .650 4.85 .25 r 4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1 / 1 9.000 d 2610-00011 tiger 9191 outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 10/8/10 b changed solder pad view dc 1/11/11 c added stencil view dc 2/18/11 d changed overall dim to match cut length and width dc 3/25/11 recommended pc board solder pad recommended stencil pattern copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
17 t ape and reel all cree carrier tapes conform to e ia-481d, automated component handling systems standard. all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) loaded pockets (500 lamps) 12.1 5.25 16 +.3 -.0 1.75 .10 4.10 leader 400mm (min) of empty pockets sealed with tape (35 pockets min.) 9.4 1 / 1 3.000 b 2402-00016 mtg loading spec -- -- -- -- -- -- 1/28/11 d. cronin revisons rev description by date app'd a initial release dc 1/28/11 b added missing sprocket holes dds 10/17/11 end start user feed direction cathode side anode side 1.5 .1 size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led
18 p ac k aging label with cree bin code, qty, lot # label with cree bin code, qty, lot # vacuum-sealed moisture barrier bag dessicant (inside bag) humidity indicator card (inside bag) patent label label with customer order code, qty, reel id, po # patent label label with cree bin code, quantity, reel id label with cree bin code, quantity, reel id label with cree order code, quantity, reel id, po # label with cree order code, quantity, reel id, po # label with cree bin code, quantity, reel id unpackaged reel packaged reel boxed reel copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? m t-g easywhite ? led

▲Up To Search▲

Price & Availability of MTGEZW-00-0000-0B00F040F

	To Download MTGEZW-00-0000-0B00F040F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .